46
Genie Distribution User Manual v1.6
© Tieline Pty. Ltd. 2015
Country
This displays the current country setting in the codec. To adjust this setting select
Settings >
System > Country
.
Caution:
Don't forget to navigate up to
Apply Settings
and press the
button to apply all
module settings before leaving this menu!
13.2
POTS Answering Configuration
Connection setting preferences are normally exchanged via session data sent between two Tieline
codecs when a connection is established. If you answer a call from a non-Tieline codec you will
need to create an answering "Config" to determine the settings used when connecting, and
designate which module will answer the call (if more than one POTS module is installed).
Important Notes:
·
POTS Answer Config
settings are applied to
POTS Codec
connections and not
Analog Phone
connections.
·
When receiving a call from a Tieline codec sending session data (i.e. not a
Sessionless
connection), the algorithm setting from the dialing codec overrides the
setting in the
POTS Answer Config
menu.
·
The default
POTS Answer Configs
accept a call from an incoming Tieline codec with
session data enabled. They will also answer a call from a Comrex POTS codec by using
the
Other
algorithm.
·
For more information about POTS answering parameters, including 'route' configuration,
please see
Configuring POTS Answering
in the Java Toolbox Web-GUI manual, or
Configuring POTS Answering
in the HTML5 Toolbox Web-GUI manual.
1. Press the the
SETTINGS
button, then navigate to
Answering
and press the
button.
2. Navigate to
POTS Answer Configs
and press the
button.
3. Navigate to
Config 1
and press
to configure a POTS module in
module slot 1
, or navigate to
Config 2
and press
to configure a POTS module in
module slot 2
.
4. Select
Info
to view current settings or
Edit
to adjust
Config
settings, then press the
button.
