Description
1.
Transformer jaw
Used to pick up the current signal. To measure current, the jaw must be
firmly closed, leaving no air gap.
2.
Transformer trigger
Used to open the jaw.
3.
Range selector switch
Used to select the input range or switch the unit off.
4.
Zero button
This buton sets the current readout to zero. This function is also used when
measuring DC current to remove an offset value caused by residual mag-
netism in the core of the jaw.
5.
Power ON/OFF led.
6.
Low battery incidator
When the indicator lights, the battery should be replaced
7.
Output terminal – (black)
This terminal is used as output for DCA – polarity and ACA.
8.
Output te (red)
This terminal is used as output for DCA + polarity and ACA.
4
Current Clamp TP-CC80
