Using the Front Panel
01-0868-401B 12/02
15
■
In a parameter list, the Next button scrolls forward, one parameter at a time,
through all parameters. When the last parameter is reached, the TDR60 scrolls
through the list again.
Parameter lists can only be scrolled through in a forward motion. If you
accidentally scroll past the required parameter, you
cannot
backup using the
Previous button; the Previous button will move you out of the parameter list
up to the previous menu level. Instead, continue to press the Next button until
the required parameter displays again.
Previous Button
The Previous button moves you through the menu structure in the
following manner:
■
At a menu level, the Previous button moves you up one menu level. If you are
at the very top of the menu structure, at the MPEG2 Receiver/Decoder main
menu, you are moved to the beginning of this menu when you press the
Previous button.
■
In a parameter list, the Previous button moves you up to the previous menu
level.
Select Buttons
The three Selection buttons are used to select the menu item or
parameter option displayed on the LCD. To select the displayed item, you press
the Select button located directly below it. The Select button performs the
following tasks:
■
At a menu level, the Select button moves you to the selected submenu
■
In a parameter list, the Select button causes the parameter and it option to
flash, indicating that you can modify that parameter’s option.
Once the parameter is flashing, you can continue to press the select button to
scroll through the list of available options. However, for those options that
require a numeric value, the value must be entered using the numeric keypad
— the selection buttons will not increment a numeric value.
Video Decoder Menu
PID No Video
Mode NTSC
Closed Caption Off
Press Next; Next Parameter Displays
Press Next; Next Parameter Displays
Press Next; System Returns to
First Parameter
LCD Display
Press Previous From any Parameter;
System Returns to the Previous Menu Level
Input Configuration Menu
LO Freq 10000 MHz
RF Freq 11210 MHz
LNB Power 13 V
Input Menu
Config Status
MPEG2 Receiver/Decoder
Input Service Faults
{
Press Previous From any Menu;
System Returns to the
Previous Menu Level
