Tiffen Steadicam Fawcett Exovest, Manual

Basic Set-up

10

Cleaning Instructions

&OHDQWKHSDGVRI\RXU6WHDGLFDP)DZFHWW([RYHVWXVLQJ

the cleaning instructions below:

Do not machine wash, do not machine dry, and do not soak 
parts in water or cleaning solution.

1.  Remove pads from the pad casing.

 Clean all parts separately

and conduct your cleaning in a well-ventilated area.

2.   Clean the dust and debris.

 Vacuum the foam with a hose

attachment. Work through the foam in circular motions,
removing any debris from all sides of the foam. Work
carefully to get inside every crevice of the foam.

3.  Spot clean.

 Hand wash only. Spot clean any stains with a

small amount of mild laundry detergent and water on a clean
cotton cloth. Gently dab at the stain with the solution.

4.  Spray, don’t soak.

 Load a spray bottle with one part mild

laundry detergent and two parts warm water. Spray the foam
until the entire surface is covered; do not soak the foam. Let
the solution sit for several hours.

5.  Remove detergent.

 With a clean, damp cotton cloth, press the

foam until all the detergent is cleaned away. If necessary, rinse the
cloth throughout the process.

6.  Dry it out.

$LUGU\RQO\/D\WKHIRDPÁDWWRGU\LQDZHOOYHQWLODWHG

area with windows; otherwise, you risk mildew forming on the foam.

$OORZLWWRGU\IRUDSSUR[LPDWHO\KRXUV

Unless there has been a spill or an accident, it’s a good idea to only 
deep clean your foam products about once a year.