Edition
Manual
Chapter
Page
2008-10-23 Workshop Manual, Stiga Titan 4 Hydraulic system
24
Hydraulic output R, direction A
5. Collector block
6. By pass line
Colour - Lines
Red is the feeding pressure lines
to the external hudraulics.
Blue is the return lines with
atmospheric pressure.
Green lines can act both as
pressure lines and return lines,
depending on the implement
movement.
R. Hydraulic outputs front, right.
Re. Hydraulic outputs rear.
R1. Control lever for the hydraulic outputs
R and Re.
T. Tank
The by pass line is blocked in valve R1.
Oil flows from the steering unit, through the
valve R1, the outputs R/Re and to the
implement performing the movement.
Thereafter back to the output, through the
valve R1, collector block 5 and back to the
tank.
The hydraulic outputs R (front) and Re
(rear) are connected in parallel. That
means that implement cannot be
connected to both R and Re at the same
time.
