Tiger Serve 1U Assembly Guide
Product Overview: Hardware Overview
4
•
8 x screws for attaching the rails to the rack.
•
printed instructions for installing the rails.
•
2 x power cables.
•
1 x 1.80m UTP network cable.
•
1 x front panel bezel.
•
1 x system restore USB flash drive.
•
1 x CD with instructions.
Important:
If any of the components listed above is missing from your
shipment, please contact your reseller or Tiger Technology support
immediately.
Hardware Overview
Note:
The pictures used to illustrate the product in this manual may differ from the
Tiger Serve appliance you have received depending on the model and firmware
version.
Technical Characteristics
Front View
Tiger Serve's front features the front panel bezel flanges and the controls of the
appliance:
•
System reset button and system power button.
Tip:
The back of the appliance features a system reset and system power buttons,
which can be used instead once you install the front panel bezel.
•
USB 2.0 port - for firmware updates and system recovery.
•
LED indicators for monitoring system status and connectivity (see “Monitoring the
Description
Specification
Chassis dimensions
27.59" (D) x 17.2" (W) x 1.71"(H)
700.7 mm (D) x 437 mm (W) x 43.5 mm (H)
Net weight
approx. 20kg/44lbs
Power Supply Unit
High-efficiency 450W, 1 + 1 Redundant Power
Supply with PFC, AC 100~240V Full Range,
50Hz~60Hz
Temperature Range
Operating: 10
º
C~35
º
C (50
º
F~94.9
º
F)
Non-operating: -40
º
C~70
º
C (-40
º
F~158
º
F)
Humidity Range
Operating: 8%~90% non-condensing
Non-operating: 5% ~85% non-condensing
