background image

Tiger Serve 1U Assembly Guide                                                                                                                                                                        

Site Installation: Site Installation

5

Rear View

The back of the appliance features the following elements:

• 

2 x power supply modules.

• 

System power button and system reset button.

• 

depending on the configuration you have purchased:

• 

8 Gb FC ports;

• 

10 Gb Ethernet ports;

• 

1 x Admin Ethernet port.

• 

1 x Public Ethernet port for communication with FC clients and Internet 

communication.

Tiger Serve supports the following types of cables for connection to the shared storage 
and client computers:

Storage  — 

fibre optic cable with LC connectors for SFP+ transceivers.

Clients via Fibre Channel — 

fibre optic cable with LC connectors for SFP+ 

transceivers.

Clients via 10GbE — 

depending on the 10GbE adapter model:

• 

fibre optic cable with LC connectors for SFP+ transceiver or copper cable with 

SFP+ transceiver.

• 

patch cable with RJ-45 modular connectors.

Clients via 1GbE — 

patch cable with RJ-45 modular connectors.

Site Installation

Unpacking Tiger Serve

Important: 

Do not throw away any of the packaging components, until you 

ensure that the appliance works properly and there is no need to return any 
part.

Tip: 

It is advisable to keep all packaging components until the warranty of 

your appliance expires.

1.

Cut the straps of the box, cut or remove the tape and open the flaps.

Summary of Contents for Serve 1U























Reviews: