Tiger Box 3U16 Assembly Guide
Product Overview: Package Content
4
Package Content
The package you have received weighs approximately 40 kg (88 lbs) and has the
following dimensions:
It must contain the following:
•
1 x 3U, 19" rack-mount chassis with 16 x 3.5” or 2.5" disks each installed in a hot-
swappable drive carrier
•
(
optional
) 1 x 3.5 or 2.5spare disk installed in a hot-swappable drive carrier for
online recovery of a failed RAID disk
•
1 x rack-mount rails kit
•
2 x power cables
•
1 x 1.80m UTP network cable
•
1 x system restore USB flash drive
•
1 x Tiger Box reset tool (used for pressing the shut down and reset buttons at the
front of the appliance)
Important:
If any of the components listed above is missing from your
shipment, please contact your reseller or Tiger Technology support
immediately.
Important:
Check if both warranty stickers at the back of the chassis are
intact. If a warranty sticker is damaged, immediately contact Tiger
Technology at support@tiger-technology.com
Hardware Overview
Note:
The pictures used to illustrate the product in this manual may differ from the
Tiger Box appliance you have received depending on the model and firmware version.
Technical Characteristics
Front View
Note:
Your Tiger Box appliance is shipped to you with its front panel bezel already
installed and to view the front panel you need to remove the bezel, following the steps
in “Install/Remove The Front Panel Bezel” on page 7.
Description
Specification
Chassis dimensions
Height
5.2" (132 mm)
Width
17.2" (437 mm)
Depth
25.5" (647 mm)
Gross weight
(with RAID drives installed)
approx. 32.66 kg/72 lbs
Power Consumption Max
800W: 100-127V a.c./12-9A/50-60Hz
1000W: 200-240V a.c./7.2-6A/50-60Hz
Power Supply Unit
1U 800/1000W Redundant Titanium Single Output
Power Supply W/PMbus
Temperature Range
Operating: 5°C - 35°C (41°F - 95°F)
Non-operating: -40°C - 70°C (-40°F - 158°F)
Humidity Range
8% - 90% (non-condensing)
