Thank you for choosing Tiger Tough™ for your
pet! Our products are manufactured of high
quality materials and feature natural sisal fibers.
Sisal textiles are durable, economical and
biodegradable. They are also an excellent
surface for scratching! The Tiger Tough™ Cat
Clubhouse Playground features:
• Multiple climbing platforms • Corner design
• Private clubhouse • Spring-y Ball Wand toy
• Sisal scratching posts • Hanging mouse toy
Assembly Instructions
Note: Product must be assembled vertically
beginning with the base and building up.
Tighten posts until connection is firm. Do not
overtighten.
Do not assemble lying down as damage may
occur to unit when righting and hardware may not
be secure for use. Assemble product on a flat,
stable surface using the tools provided.
Care Instructions
• Periodically inspect unit and tighten screws as needed.
• Wipe down wood surfaces with damp, clean cloth as needed.
• Spot clean fibers only with gentle detergent diluted with water.
• Fabric covers can be handwashed as needed. Use mild detergent; hang dry.
Hints & Tips
• Because it is a natural fiber, it is normal for sisal to discolor over time.
• Exposure to direct sunlight or moist conditions may damage the unit.
• For greater stability, place the playground unit near a wall.
• Never let children or larger animals play on or climb the playground unit.
This is extremely unsafe and may lead to damage or harm.
• Not recommended for outdoor use.
• Keep tools and instructions for future use and reference.
Problems or Questions?
Please contact FurHaven Customer Service at 1.888.459.2337 or via email at
service@furhaven.com. Monday through Friday ~ 7:30 am to 4:00 pm
1
4
5
A
A
A
A
A
B
7
9
A
B
B
8
8
7
7
6
6
6
8
2
2
3
B
B
B
B
Step 1: Attach posts (7) to base (1)
using hardware A screw & C washer.
Step 2: Screw dowels B into base
posts 7 and position fabric-covered
clubhouse base 2 through dowels.
Step 3: Attach clubhouse interior
posts 6 to exposed dowel ends.
Step 4: Secure wood clubhouse top 2
to center position post 6 with screw A.
Step 5: Screw dowels B through wood
clubhouse top 2 into posts 6 in the
left and right position.
Step 6: Carefully pull clubhouse fabric
cover 3 into place over dowels B in
clubhouse wood top 2. Pull down.
Step 7: Carefully screw posts 8 into
clubhouse top 2.
Step 8: Position center platform 4
over posts 8 and secure left side with
one screw A.
Step 9: Secure right side of center
platform 4 with dowel B.
Step 10: Carefully screw last post 8
into center platform 4.
Step 11: Attach spring-y ball wand 9 to
center platform 4. The hole is located
approx 2 inches from left screw.
Step 12: Attach top platform 5 to final
post 8 using screw A.
