14
Making Coffee
Turn the lock bar in the direction of the
arrow to lock the cylinder in place.
9
Press the flavor selection keys and strength selection
keys, or the [Dual Temp] key, to select your preferred
flavor and strength, then press the [Start|Stop] key.
The selected keys illuminate.
When menu settings are being selected, the [Start|Stop] key
blinks. When the [Start|Stop] key is pressed, coffee extraction
starts, two beeps sound, and the [Start|Stop] key stops
blinking and remains on.
11
Connect the plug to an outlet.
The [Start|Stop] key begins blinking. After approximately
three seconds, it becomes possible to select a menu setting.
If the lock bar is not turned to the lock position, menu
selections will not be possible even when the plug is
connected to an outlet.
10
Lock bar
[Dual Temp] key
Flavor
selection keys
Strength
selection keys
Install the cylinder unit onto the main
unit.
8
Cylinder unit
Adjustable menu settings
z
Flavor selection keys
The flavor can be selected in three stages from [Acidic] to [Bitter].
z
Strength selection keys
The strength can be selected in three stages from [Light] to [Strong].
A total of 10 patterns can be selected: three flavor stages × three strength stages (nine patterns) + one
recommended pattern.
On
Two beeps
Caution
y
When installing, be careful not to turn the upper cylinder.
If the upper cylinder is turned, the lock bar will not turn in
step
❾
.
Caution
y
When locking, be careful not to pull the pouring bar toward you. Water
may come out from the spout, causing spillage onto the table or rug.
Caution
y
Do not press and hold the [Dual Temp] key (for three
seconds or longer). Doing so will change the operation
sound setting.
→
P. 11
Pouring bar
Summary of Contents for ADS-A02U
Page 23: ...23 Others MEMO 38 memo ...
