background image

7

Introduction

 Precautions on each part

Power cord and plug

Warning

  Do not use the appliance in the following ways:

 

y

Use outside 120 VAC.

 

y

Use with an outlet connected 

with multiple plugs. 

 

(Be sure to use an outlet rated 

at 15 A or higher exclusively for 

the appliance.)

 

y

Use that may damage the power 

 

cord or use while this cord is damaged. (For 

example, the power cord must not be modified, 

bent forcibly, placed near a high temperature 

area, pulled, twisted, bundled, placed under 

a heavy object, dangled from the edge of a 

desk, or tucked.)

 

y

Use while the plug has dust adhering to 

it or is damaged.

 

y

Use with the plug not completely 

plugged to an outlet.

 

y

Plugging and unplugging with wet 

hands.

 

y

Use while the appliance is wet (soaked 

in water or with water poured on it).

 

y

Disconnecting the plug during coffee 

extraction.

This precaution is to avoid electric shock, electric leakage, or injuries. Usage as shown above 

may cause a fire, short circuit, smoke, ignition, or malfunction.

In the case of breakage, immediately disconnect the power plug from the outlet and contact 

TIGER CORPORATION U.S.A. for inspection and repair.

Caution

  •   Disconnect the plug before cleaning and leave unplugged when not in use.

 

•   Be sure to grip the plug when removing the power cord.

This is to avoid burns or injuries. Failure to do so may cause an electric shock, short circuit, or 

ignition; fire due to a short circuit; or damage to a nearby wall or furniture.

Do not touch

the unit with

wet hands

Unplug the

power cord

Main unit

Warning

Never immerse

the unit in water

or other liquid

 Do not soak this appliance in water or pour water on it.

 

y

Do not wash the entire appliance.

 

y

Do not pour water into the main unit.

Otherwise, water may get into the main unit and cause an electric shock.

This is to avoid short circuits, malfunctions, or fire.

Caution

  Do not lean on or otherwise apply your body weight to the main unit.

Applying your center of gravity to the front of the appliance may result in deformation, 

damage, or a malfunction.

It may also result in injuries due to the main unit falling over.

Power cord

Plug

Summary of Contents for ADS-A02U

























Reviews: