Tiger ADS-A02U Instruction Manual Download

Page: 8 / 24

Caution

Do not start coffee extraction with

no water in the upper cylinder.

Doing so may result in fire or a malfunction.

Do not remove the upper cylinder

or lid during coffee extraction.

Doing so may result in burns, water

leakage, or a malfunction.

Do not forcefully pull on the large and small lower

gaskets attached to the upper cylinder.

→

P. 17

Doing so may cause a malfunction.

Do not forcefully pull on the small gaskets (in

eight locations) attached to the joint.

→

P. 17

Doing so may cause a malfunction.

Wait for the upper cylinder to cool down

(wait approximately 10 minutes) before

removing it after coffee extraction.

Failure to do so may result in burns.

Safety instructions to follow so that the

appliance can be used for many years

Do not use this product with less

water than the minimum amount (the

one cup water level). Also, do not

insert more water than the maximum

amount (the two cup water level).

Do not leave water or

coffee in the upper

cylinder or tray.

Doing so may cause a

malfunction, discoloration,

unpleasant odors, or

spoilage.

Do not start coffee extraction with anything

other than water in the upper cylinder.

Doing so may cause a malfunction.

Gaskets

Filter

Lower cylinder

Tray and tray cover

Lid/Upper cylinder/Joint

Caution

Be sure to set the upper cylinder

gasket, joint gasket, and water pumping

pipe gasket in place before use.

Failure to do so may result in burns, water or steam

leakage, defective operation, or a malfunction.

Caution

Do not forcefully pull

on the filter gasket.

→

P. 17

Doing so may cause a

malfunction.

Caution

Do not extract coffee with the

lower cylinder removed.

Doing so may cause hot water to

splash out, resulting in burns.

Wait for the lower cylinder to cool down

(wait approximately 10 minutes) before

removing it after coffee extraction.

Failure to do so may result in burns.

Caution

Do not use this

product with the

tray or tray cover

removed.

Doing so may result in

burns and/or spillage.

█

Precautions on each part

Upper cylinder gasket

Upper cylinder

Lid

Upper

cylinder

Tray

Joint

Tray cover

Tray

Water pumping pipe gasket

Joint gasket

Filter gasket

Summary of Contents for ADS-A02U

























Search results

Summary of Contents for ADS-A02U

Reviews:

Related manuals for ADS-A02U

Brands by name

Popular brands

Tiger ADS-A02U, Instruction Manual

Search results

Summary of Contents for ADS-A02U

Reviews:

Related manuals for ADS-A02U

Brands by name

Popular brands