10
3. DECK BUILDER
3. DECK BUILDER
3. DECK BUILDER
3. DECK BUILDER
3. DECK BUILDER
This function allows you to make a group of cards into a
single ‘deck’. You must define all the cards that will be in
the deck. There are three sub-menus: VIEW, BUILD, and
PRACTICE.
Use your UP and DOWN arrows to select from the three
choices in the sub-menu. Then press ENTER to enter the
sub-menus function of either VIEW, BUILD or
PRACTICE. When you’re done, press QUIT to return to
the Main Menu.
Let’s go through these three functions more closely:
VIEW
When you select VIEW, you will see a list of all cards
currently in your deck. The top line of this entry is always
the total number of cards in the deck, for example,
TOTAL : XX.
When the deck list is empty, the words NO RECORD
appear in the middle of the screen. The number of the
card is highlighted. The maximum number of cards you
can put in your deck is 60 plus one Wizard card.
The number of each card is limited to 4, except for the
Lesson cards.
Use the UP and DOWN arrows to scroll and highlight
cards.
Press ENTER to bring up the TEXT of the currently
highlighted card.
Press DELETE to remove the currently
highlighted card from your deck list. When the
card is the last one in your list, you’ll be
prompted with “DELETE: Y/N” before the final
delete.
