BEFORE YOU GET STARTED
Please retain instructions for future reference
05
04
tigersheds.com
0113 205 4189
sales@tigersheds.com
TOOLS REQUIRED
We recommend using the following tools (not supplied):
SCREW
FIXING PACK CONTENTS:
• From the outside working in, cut banding holding all components together and remove the Module Packs.
Note: parts may have become loose or moved during transportation.
• Large items like doors and windows are screwed into cross brace. Remove screws as you come to
corresponding Module Pack to reduce the risk of falling components.
• All Module Packs are individually banded together. For ease, remove from vertical position on pallet and cut
Module Pack banding when on a horizontal surface.
RUBBER MALLET
DRILL
LADDER
TAPE MEASURE
SHARP KNIFE
SPIRIT LEVEL
13mm Galvanised Clout Nails
(C13) x80
25mm Black Screws
(S25) x16
35mm Screws
(S35) x200
30mm Galvanised Nails
(N30) x140
30mm Galvanised Nails
(N40) x20
40mm Screws
(S40) x24
50mm Screws
(S50) x18
IMPORTANT
• Before assembly please make sure you have a suitable base ready to erect your building on.
• This base MUST be level and flat to ensure that the building is assembled properly and lines up.
• Please carefully unpack the components in your delivery, and remove the untreated timber supports that make up the
boxed pallet.
•
DO NOT
start your build until you have checked that all the parts of your building are present and in a suitable condition.
• If you are organising a third party to install your building, it is best practice not to schedule this immediately on receipt of your
order, to give you time to check your delivery.
BUILDING PACK CONTENTS:
For full details of what should be included please see the Module Pack List that is supplied with the delivery. They
are also available on request in pdf form from our helpful Customer Support team – please call 0113 2054189 for
Customer Support or use the Items Delivered Query form at
tigersheds.com/contact.
Cross Brace
HAMMER
WOOD SAW
