This User's Manual includes instructions and notes; the operator must read it carefully and follow these instructions. It is very
important for you to know all these rules.
5.1 Operating Steps
Step 1 :Press the power switch to turn on the Skyboard.
Step 2: Get ready to drive. First, step on one pedal to trigger the foot-switch. The system will enter self-balancing mode. Then step
on with your other foot.
Step 3: Stand upright but relaxed. Do not make any sudden or jerky movements. Shift your weight forward or back to control the
Skyboard.
Step 4: Shift your weight to turn. Putting more weight on your right foot turns left. Putting more weight on your left foot turns
right.
Step 5: Get off. Before you get off, make sure that the Skyboard is stopped, then step off one foot at a time. Please be careful.
If the Skyboard doesn't self-balance when you trigger the foot-switch, the warning LED will light.
Do not operate
the Skyboard. Wait a few minutes and try again. If you are on a slope, move the Skyboard to flat ground. If this
continues, please contact technical support. DO NOT OPERATE!
-10-
CHAPTER V LEARNING TO USE IT
NOTE