HDMI 2.0 4x1 Presentation Switcher with Audio Extraction
22
Command
Function
Example and Feedback
3
9600
4
19200
5
38400
6
57600
7
115200
The “[Y]” can be 0 or 1.
If the “[Y]” is “0”, clear the saved
command “xxx”.
If the “[Y]” is “1”, automatically send the
command “xxx” to the third-party device
when power on the switcher.
CMD_ON Save
Success!
455665
[X]/[Y]:xxx.
When power off the switcher, set the
command “xxx” to send to the third-party
device whose baud rate is [X].
When press the
DISPLAY OFF
button,
send the command “xxx” to the third-party
device whose baud rate is [X].
[X]
Baud Rate
[X]
Baud Rate
1
2400
2
4800
3
9600
4
19200
5
38400
6
57600
7
115200
The “[Y]” can be 0 or 1.
If the “[Y]” is “0”, clear the saved
command “xxx”.
If the “[Y]” is “1”, automatically send the
command “xxx” to the third-party device
when power off the switcher.
3/0:455666.
3/1:455666.
CMD_OFF Save
Success!
455665
CEC[I/O][port][comma
nd].
Send CEC command to control the source
device or the display device.
The “
[I]
” represents the input port. The
“
[O]
” represents the output port.
The “
[port]
” represents the port number.
The input ports are 01~03, and the output
ports are 01.
The “
[command]
” represents the specific
command from the table below.
CECI0200.
CEC Input 2 Send
Success!
