TS4-A-F INSTALLATION
Standard modules can be equipped with TS4-A-F add-on units as
shown below.
Always connect modules to TS4-A inputs before connecting outputs.
Each TS4-A-F must have a PV module connected to its input before
connecting the outputs of TS4-A-F units in series.
To disconnect TS4-A-F from a module, disconnect the TS4-A-F outputs
from the string before disconnecting the TS4-A-F inputs from the
module junction box.
11
Tigo Rapid Shutdown
DO NOT DISCONNECT
UNDER LOAD
NEC 690.12-2017 and C22.1-2015 Rule 64.218
4 - 123A
TS4-A-F
Tigo Rapid Shutdown
DO NOT DISCONNECT
UNDER LOAD
NEC 690.12-2017 and C22.1-2015 Rule 64.218
4 - 123A
TS4-A-F
Tigo Rapid Shutdown
DO NOT DISCONNECT
UNDER LOAD
NEC 690.12-2017 and C22.1-2015 Rule 64.218
4 - 123A
TS4-A-F
Tigo Rapid Shutdown
DO NOT DISCONNECT
UNDER LOAD
NEC 690.12-2017 and C22.1-2015 Rule 64.218
4 - 123A
TS4-A-F
1
3
2
RSS Transmitter must be powered OFF during TS4-A-F installation.
