IMPORTANT SAFETY INSTRUCTIONS
LETHAL VOLTAGE MAY BE PRESENT IN ANY PV INSTALLATION
SAVE THESEINSTRUCTIONS
•
This manual contains important instructions for installation a n d maintenance of the Tigo
product models TS4-L, TS4-O, TS4-S, TS4-M, TS4-A-O, TS4-A-O-Duo, TS4-R-O, TS4-R-S, TS4-R-M,
TS4-R-O-Duo, TS4-R-S-Duo, TS4-R-M-Duo, Tigo Access Point (TAP), Cloud Connect
A d va n ce d (CCA), a n d related Tigo software a n d mobile applications.
•
Risk of electric shock, d o not remove cover, disassemble, or repair, no user serviceable
parts inside. Refer servicing to qualified service personnel.
•
Before installing or using the Tigo System, please read all instructions a n d warning
markings on the Tigo products, appropriate sections
of your inverter manual,
photovoltaic (PV) module installation manual, a n d other available safety guides.
•
Failure to adhere to these instructions m ay result in injury or death, d a m a g e to the
system, or voiding the factory warranty.
•
To reduce risk of fire a n d shock hazard, install this device with strict adherence to
National Electric C o d e (NEC) ANSI/NFPA 70 and/or local electrical codes. When the
photovoltaic array is exposed to light, it supplies a DC voltage to the Tigo TS4 units. The
TS4units start in the “ O N ” state a n d their output voltage m ay b e as high as the PV
module open circuit voltage (V
OC
) when co n n e cte d to the module. The installer should
use the same caution when handling electrical cables from a PV module with or without
the TS4units attached.
•
Installation must b e performed by trained professionals only. Tigo does not assume
liability for loss or d a m a g e resulting from improper handling, installation, or misuse of
products.
•
Remove all metallic jewelry prior to installing the Tigo TS4 units to reduce the risk of
contacting live circuitry. Do not attem pt to install in inclement weather.
•
Do not operate the Tigo TS4 units if they have b e e n physically d a m a g e d . Check existing
cables a n d connectors, ensuring they are in g o o d condition a n d appropriate in rating.
Do not operate Tigo TS4 units with d a m a g e d or substandard wiring or connectors. Tigo
TS4 units must b e mounted on the high e n d of the PV module backsheet or racking
system, a n d in any case a b o ve ground.
•
Do not connect or disconnect under load. Turning off the Inverter and/or the Tigo
products m ay not reduce this risk. Internal capacitors within the inverter c a n remain
charged for several minutes after disconnecting all power sources. Verify capacitors
have discharged by measuring voltage across inverter terminals prior to disconnecting
wiring if service is required. Wait 30 seconds after shutdown activation before
disconnecting DC cables or turning off DC disconnect.
•
Always assume TS4 units are in “ O N ” state, or m ay turn on when restarting.
•
The CCA must b e on the same AC branch circuit as the inverter to meet shutdown
requirements.
12/ 13/ 2019
2
Summary of Contents for TS4-A-O
