40
Tiki start – ENGLISH
Tiki Safety AB and the notified body performed an assessment on the risks against
which the Tiki start is intended to protect.
A report on this risk assessment is part of the reports as indicated in paragraph:
7.1 Reports on page 39.
The markings on the filter as indicated in paragraph 2.5 Pictograms on page 20 are to
EN 12942, do not confuse to any other European standard or other standard.
7.3 Regulation standards
The Tiki respirator mask and this manual to it are in accordance to:
■
The high-standard specifications of Tiki Safety AB
■
Regulation (EU) 2016 / 425 on Personal Protective Equipment (PPE)
■
Mark that regulation (EU) 2016 / 425 on PPE replaces the previous directive:
89 / 686 / EEC.
› Annex III of the PPE regulation 2016 / 425
› Annex II of the PPE regulation 2016 / 425
■
ISO 13688 – 2013
■
EN 12942:1998/A2:2008
As the Tiki start applies fully to the above regulation standards, there are no other
harmonised standards or descriptions of other technical specifications that have been
applied in order to satisfy the applicable essential health and safety requirements.
7.4 Patented design
The Tiki start is a patented design that is worldwide protected under patent number:
D755953.
7.5 CE
As the Tiki start is certified and tested to the regulation standards as under paragraph:
7.3 Regulation standards on page 40 and adhered to an CE examination in
accordance to EU 2016/425, it bears a CE marking.