12
Tiki medical – ENGLISH
2 Design
2.1 Description
2.1.1 General description
The Tiki medical mask is:
■
■
A Powered Air Purifying Respirator (PAPR)
■
■
A mask that covers the entire face of the user
■
■
Equipped with two (2) filters: the inhalation filter (white) and an optional
exhalation filter (green), both (2) are P3 particle filters
The inhalation filter (white) is a filter that purifies the air that comes in to the enclosed
air volume between the Tiki medical mask and the face of the user. And thus provides
filtered air to the user to inhale.
The exhalation filter (green) is a filter that purifies the air that goes out from the
enclosed air volume between the Tiki medical mask and the face of the user.
And thus purifies the air that the user exhales.
Therefore, the Tiki medical mask can for example be used in a medical
environment were patients hold a suppressed immunity system due to sickness or
other reason.
This to prevent that such patients are infected involuntary with aerosol or droplet
pathogens of the medical personnel.
2.1.2 Parts
Aside the below indicated, the Tiki medical mask is shipped with the following items
that are not indicated on figure 1:
■
■
This user manual
■
■
A small half-circle shaped chin protection
The battery charger is shipped with four (4) power plugs that can be changed as to
the local standard of the client.
The battery charger is a standard AC to DC adapter with input: 100 – 240 V, 50 –
60 Hz and 0,7 Amp.
The Tiki medical mask is composed of the following parts.
Also refer to figure 1 on the next page.
■
■
The mask
(visor) in PET and TPE
■
■
The harness
, made of elastic webbing and clips in nylon.
Unless it is exposed in hazardous environments, to contagious pathogens or
other harmful particles, the harness can be reused.