ENGLISH – Tiki medical
13
■
■
The blower
contains the fan, the work lights, the operational buttons and
warnings.
It automatically adjusts airflow in accordance to the demand inside the mask to
maintain a positive pressure.
The blower contains a LiPo battery that as fully charged runs the blower for
minimal 60 minutes.
■
■
The inhalation filter (white)
is a P3 particle filter.
Mark that the Tiki medical mask includes only particle filters and is therefore not
be used in areas that contain gaseous solvents and other hazardous airborne
contagions that a P3 particle filter does not remove.
The inhalation particle filter is composed of ABS plastics and HEPA fibreglass
media.
■
■
The exhalation filter (green)
is a P3 particle filter.
Mark that the Tiki medical mask includes only particle filters and is therefore not
be used in areas that contain gaseous solvents and other hazardous airborne
contagions that a P3 particle filter does not remove.
The exhalation particle filter is composed of ABS plastics and HEPA fibreglass
media.
■
■
The battery charger
, supplies electric power to the internal battery of the
blower and the external battery. The batteries have to be charged separately,
internal battery first, followed by external battery if applicable.
Always charge batteries supervised, and never charge batteries when the
battery temperature is less than 0° C.
■
■
External battery
is an option and sold separate.
The external battery is a clip-on unit that contains a larger LiPo battery.
It connects to the blower with a cable and screw fitting.
This increases the battery life for minimal 6 hours, provided that the seal is tight.