40
Tiki medical – ENGLISH
7. Standards
The Tiki medical mask adheres to the following standards.
7.1 Reports
7.1.1 Notified body
Tiki Safety AB appointed the independent notified body British Standard Institute
(BSI) for the examination on the Tiki medical mask and the production line of the Tiki
medical mask in regard to the regulation standards under: 7.3 Regulation standards on
page 40.
BSI group (2797): Say Building, John M. Keynesplein 9, 1066 EP Amsterdam,
Netherlands.
The independent notified body carried out verifications and tests to verify:
■
■
The conformity of the Tiki medical mask
■
■
The production line of the Tiki medical mask
both in regard to the applicable essential health and safety requirements and the
relevant protection class.
The reports, calculations, inspections and examinations on these tests that are
carried out, are available as to the specifications of EU 2016/425 on request to Tiki
Safety AB, refer to:
www.tikisafety.com
.
7.1.2 External body
The Research Institutes of SwEden (RISE) performed tests on the Tiki respiratory mask
towards the ability and efficiency to clean the Tiki respiratory mask and effectively
remove the biohazardous particles of hazardous mixtures
The results of these tests were positive.
7.1.3 Performance test
To ensure the conformity of the Tiki medical mask in the production, Tiki Safety AB
performs a vacuum test on every mask.
Tiki Safety AB performs these tests on every mask to ensure the conformity of the
Tiki medical mask manufactured with the design specifications.
For the description of the performance test, refer to sub-paragraph:
2.4.3 Performance tests on page 19.
7.2 Protection class
The Tiki medical mask holds the protection class:
EN 12942 TM3P R SL, CE 2016 / 425.