2 4001239
Package Contents
A Vessel
B Pole Sections (4)
C Snuffer
1
ASSEMBLING THE TORCH
The Top pole section has a chain. The Bottom pole
section has the angled end and, if included, a hinged
step. (Fig. 1)
1. Screw the pole sections together for the height
you want. (Fig. 2)
Torch Height
Pole Sections
Full Size
4
Garden
3
2. Add the torch head to the assembled pole. (Fig. 3)
3. Position the assembled torch
before you fill the torch head with
fuel. Flip the step down into position, if included.
4. Insert the pole into the ground.
5. Press the pole into the ground at least 6 inches or
until the step is against the ground. (Fig. 4)
2
FILLING AND LIGHTING THE TORCH
1. Unscrew the torch head from the pole.
2. Remove the magnetic snuffer.
3. Hold the base of the torch head with one hand
and rotate the flameguard to open the fuel
filler opening. (Fig. 5).
Garden Torch
B
A
C
Fig. 2
Full Size Torch
NOTE:
After the first time the torch is
used, soot might prevent the flameguard
from rotating. Hold the flameguard as
shown in Fig. 6 and push up gently. Then
rotate the flameguard
.
Fig. 3
Fig. 6
Fig. 1
Fig. 5
Fig. 4