TDFM-136B Operating Instructions
08RE399
3.3.2
Assign Key by KeyTag
Level 3
Key
Scope: Main only
This command allows the user to select a memory, and then assign a key, via the KeyTag, to that
memory.
First, step through available memories, and select one to assign a key to.
Figure 3-21. Selecting the Memory to Assign the Key to
Edit Keys
step up/down through available memories (Main only)
accept the entry and exit
abandon the entry and exit
Once a memory has been selected, then step through the available KeyTags and pick one to
assign to the selected memory.
Figure 3-22. Selecting the KeyTag to Assign to the Memory
Edit Keys
step up/down through available keytags.
accept the entry and exit
abandon the entry and exit
After assigning the key, set how the decrypt function is applied to receiving on this memory: by only
decrypting signals encrypted with the assigned key, or by decrypting if the received signal was
encrypted using any key currently loaded into the radio.
Figure 3-23. Selecting the decrypt option: Any Key or Assigned Key
Edit Keys
toggle Receive Key Option: Any Key / Selected Key.
accept the entry and exit
abandon the entry and exit
Technisonic Industries Ltd.
41
3-2 Assign Key by KeyTag
Main Memory ({},#*):001
3-2 Assign Key by KeyTag
KeyTag(|~,#*):Key Tag 01
3-2 Assign Key by KeyTag
Set Rx Key: Any Key
