17
All connections must be made before sealing the TileVision
®
into the back box.
The IR Link, RJ12 and RS-232 Connectors
IR Link Out
The IR Link Out is a 3.5 mm mono jack socket. The IR signal sensed by the TileVision
®
is outputted
from this socket to an IR emitter. This will enable the remote control of external equipment, such as a
DVD player, from the TileVision
®
.
IR Link Out Connections – IR Emitter
IR emitter LED positive terminal to the Tip.
IR emitter LED negative terminal to the Sleeve.
IR Link In
The IR Link In is a 3.5 mm stereo jack socket. This socket allows an auxiliary IR sensor to be
connected to the TileVision
®
to enable remote control of the TileVision
®
from a different point other
than the front of the TileVision
®
.
IR Link In Connections – IR Receiver
The TileVision
®
interface will 5v DC to power
the IR sensor.
IR 5v DC terminal to the Tip.
IR sensor signal output terminal to the Ring.
IR sensor negative terminal to the Sleeve.
3.5 mm mono jack plug
Tip Sleeve
Ring
3.5 mm stereo jack plug
Tip
Sleeve
RJ12 Connector
This connector is for Hotel TV System Integration. The RJ12 allows command codes to pass to and
from the TileVision
®
. The RJ12 pin assignment is internally configurable, to allow the connection of
various Hotel TV Systems.
RS232 Port
The RS232 control port enables the TileVision
®
to be controlled from a home automation
control system.
For detailed information on the IR Link, RJ12 and RS-232 connections and
the relevant control signals see the TileVision
®
Interface Connections pdf
on the TileVision
®
web site (www.tilevision.tv – support – user support).
