37
The EPG Timer Recording
The Electronic Programme Guide is only available when viewing Digital TV.
To record a programme from the EPG.
1
Press the
EPG
button. The EPG will be displayed with the current channel being viewed, highlighted.
2
Press the
7
8
buttons to set the required date, the date can be set within the next seven days from the
current date.
3
Use the
56
&
34
buttons to move the highlight around the EPG to select the required programme.
4
Press the
RED
button.
5
The
RECORDER
settings will be displayed.
6
Press the
56
buttons to highlight MODE.
6a
Press the
34
buttons to set the required recording sequence.
ONCE.
EVERYDAY.
WEEKLY.
7
When the mode is not set to auto, the START time and END time can be adjusted.
7a
Press the
56
buttons to highlight the item to be adjusted.
7b
Press the
34
buttons to set the value.
8
When all the information has been entered press the
OK
button.
9
The Timer Confirmed notification will be displayed.
If a programme recording time conflicts with another recording the Timer Confirmation notice will
advise a Timer Overlap and the current setting will be deleted. The timer recording will not be set.
Timer Recording - Indication.
With the TileVision in standby mode (red LED lit). The LED will change to green to indicate
that the recording is in progress, a picture will NOT be displayed. On completion of the
recording the LED will revert back to red.
Manual adjustment of a timer recording.
A USB memory stick (flash drive) must be installed.
