background image

 

14 

Engine Key Positions: 

Off: 

Key  should  be  in  the  OFF  position  when  generator  is  not  in  use.    Key  may  also  be 
turned to the off position to stop the engine.  

ON: 

Key  should  be  in  the  ON  positions  while  engine  is  running  or  prior  to  starting  the 
engine with the remote or recoil starter. 

 

START:

  Turn key to start position to start the engine.   

 

 

Do not turn the key switch to START position when the engine is running.  
Doing so may damage the starting motor.  
 
Do not leave key in the ignition unattended. 
 

 
For starting instructions, see STARTING THE GENERATOR on page 18. 
 

Recoil Starter:  

The recoil starter may be used to start the engine instead of the key or remote start or if the battery 
is  discharged.    To  start  the  engine,  pull  the  starter  grip  lightly  until  resistance  is  felt,  then  pull 
briskly.  Repeat as necessary to start.  See STARTING THE GENERATOR on page 16 for more 
information. 
 

 

Do  not  allow  the  recoil  starter  handle  to  snap  back  against  the  engine. 
Return it gently to prevent damage to the starter.  
 
When  starting  the  engine  by  recoil  starter,  set  the  key  switch  to  the  ON 
position and pull the recoil starter handle. 
 

 

Fuel Valve: 

The fuel valve is located between the fuel tank and carburetor. When the 
lever is in the off (horizontal) position, the valve is closed and fuel will not 
flow from the gas tank to the engine.  
 
When  the  valve  lever  is  turned  to  the  ON  (vertical)  position,  fuel  is 
allowed to flow from the fuel tank to the carburetor.  
 
Be sure to return the fuel valve lever to the OFF position after stopping the 
engine.  

 
Choke Lever: 

The  choke  is  used  to  help  start  a  cold  engine.    The  choke 
shutter reduces the amount of air being mixed with fuel, thus 
providing  an  enriched  fuel  mixture  which  combusts  more 
easily.  The  choke  is  designed  to  operate  automatically  with 
the  remote  starting  feature,  but  must  be  opened  and  closed 
manually  when  using  the  key  or  recoil  start.    The  choke  is 
closed for starting when the large rectangular portion of the 
choke lever is rotated as far as it will easily go toward in a 
counter-clockwise direction (toward the air filter).  Once the 

Shown 

off 

Summary of Contents for TPP-4500G-A































Reviews: