Note:
1. If the measured resistance exceeds the maximum value of the
selected range, the display will show “OL”. At this time, you should
select a higher range. When measuring resistance above 1MΩ, it
may take a few seconds for stable readings. This is normal for high
resistance measurements.
2. When there is no input, such as open circuit, the meter displays
“OL”.
3. When checking the online resistance, you must first turn off all
power in the circuit under test, and have all capacitors fully
discharged.
Resistance Measurement
1. Insert the black test lead into the “COM” jack and the red test
lead into the “
VΩmA
” jack.
2. Set the function range switch to the required Ω range position,
and connect the test leads to the measured resistance in parallel,
read the measurement results from the display.
-12-
Summary of Contents for FY8233X
Page 1: ...Model FY8233X Digital Multimeter User Manual...
Page 2: ...Manual Download Q A...
Page 4: ...02...
Page 18: ......