Precautions for Use
• The meter can only be used with the provided test leads to meet
the requirements of safety standards. If the test leads are damaged
and needs to be replaced, you must replace with the test leads of
the same model or the same electrical specifications.
• Do not exceed the input limit specified for each range.
• Do not touch unused input terminals while the meter is measuring.
• When the range to be measured cannot be confirmed, set the
function range switch to the maximum range position.
• Before the function switch is switched, the test leads and the
circuit under test should be in open circuit state.
• Before measuring online resistance, please turn off all power in
the circuit and discharge all capacitors.
• When measuring voltages higher than DC60V and AC30V, be
careful and remember that your fingers can not exceed the
shielding part of test leads.
• When measuring TVs or switching power supplies, be aware that
there may be pulses in the circuit that can damage the meter.
-04-
Summary of Contents for FY8233X
Page 1: ...Model FY8233X Digital Multimeter User Manual...
Page 2: ...Manual Download Q A...
Page 4: ...02...
Page 18: ......
