2
3.
Assembly
Unfolding and folding
•
Before folding the walker, mount legs with tips or with wheels.
•
To unfold the walker, pull the sides apart to the maximum
position until the handgrips are locked.
•
To fold the walker, press the plastic element located in the middle
on the transverse frame and fold the sides.
Height adjustment
•
The height should be set on such a level that the user, who is
leaning against the handgrips, stands upright, as far as he or she is
able to, with his or her shoulders in rest position and with slightly
bent elbows. It is inadvisable to hang on the walker with all the
body weight.
•
To adjust the height of legs, press the metal pin, select
appropriate height of the leg, and lock the position of the legs
relative to each other. The legs are adjustable in 2.5 cm
increments.
Note!
The pins must be set on the same level in each leg.
Selection of functions
•
Rigid function – remove locking clips from the upper horizontal
element which reinforces the frame, and place them into the
openings which are located on the same height level but on the
vertical element of the frame.
•
Reciprocating function – place the locking clips again into the
mounting openings on the horizontal element.
•
Legs with tips or with wheels can be mounted regardless of
chosen function.
4.
Technical data
Overall width with tips
Overall width with wheels
55 cm
60 cm
Inner width
46 cm
