2
3. Assembly
Step 1.
Place seat upside down on a flat surface.
Step 2.
Fix crossed base tubes with seat using five wing screws with
washers.
Step 3.
Join base tubes with legs.
HEIGHT ADJUSTMENT
•
To adjust the height of the shower chair, press metal pin, select
appropriate height of leg, and lock the position of the tubes
relative to each other with the use of locking pin. The legs are
adjustable in 2.5 cm increments.
Note!
The pins must be set on the same level in each leg.
4. Technical data
Width
33 cm
Height
36-54 cm
Seat diameter
32 cm
Weight
1.6 kg
Maximum capacity
136
kg
5. Notes
Timago International Group does not bear responsibility of improper
use of the shower chair, failure to comply safety regulations and
misuse.
6. Maintenance
•
Clean the shower chair regularly using only water, sponge and
mild detergents for plastic materials such as soap. Dry thoroughly.
•
Do not use
for cleaning: strong detergents, abrasive agents,
bleach, petrol or solvents (it may cause frame damage, visible
defects and in consequence - loss of warranty rights).
•
At least once every three months check: