2
3.
Assembly and general recommendations for use
Step 1.
Place seat upside down on a flat surface.
Step 2.
Fix crossed base tubes with seat using four wing screws with
plastic and metal washers. Screw paler wing screw with washers in the
middle.
Step 3.
Join base tubes with legs.
HEIGHT ADJUSTMENT
•
To adjust the height of the shower chair, press metal pin, select
appropriate height of leg, and lock the position of the tubes
relative to each other with the use of pin. The legs are adjustable
in 2.5 cm increments.
Note!
The pins must be set on the same level in each leg.
4.
Technical data
Width
33 cm
Height
34.5-52 cm
Seat diameter
32 cm
Weight
1.95 kg
Maximum capacity
110 kg
5.
Notes
Timago International Group does not bear responsibility of improper
use of the shower chair, failure to comply safety regulations and
misuse.
6.
Maintenance
•
Clean the shower chair regularly using only water, sponge and
mild detergents for plastic materials such as soap. Dry thoroughly.
•
Do not use
for cleaning: strong detergents, abrasive agents,
bleach, petrol or solvents (it may cause frame damage, visible
defects and in consequence - loss of warranty rights).
