IM2021
20
5. PERATION OF THE DEVICE
- On/Off
- Steam intensity adjustment
-
Timer settings
-
Constant humidity switch
-
function «PLASMA»
- night mode
-
UV mode
Switching on
Install the appliance vertically on a flat and dry surface, fill the tank with water then
connect the device to the power line. Press the
button. The device will start to
operate in low steam intensity mode. At the very beginning of operation, the atomizing
level may appear unstable, which is caused by the temperature difference and water
quality. It will take a short period time for this process to stabilize.
Adjusting steam outlet intensity
Press the
button to adjust steam outlet intensity. After turning on the device, it will
operate in medium steam intensity mode. Press the
button one time to select low
steam intensity. Press the
button again to select high steam outlet intensity.
The more steam comes out, the stronger and faster air humidification will be.
Comfortable conditions are reached at 40 to 60% relative air humidity. You can
yourself determine the comfortable humidity level or use hygrostat function by pressing
the
button.
ATTENTION!
If a large amount of condensate is generated on the upper part of the appliance when it
is operating, then you need to decrease the steam outlet intensity.
Summary of Contents for T-HU3.5-A14E-W
Page 51: ...IM2021 51 ДЛЯ ЗАМЕТОК ...
Page 52: ...www timberk ru ...
