1.Mist nozzle
2.Water tank handle
.
Power cord and plug
4.Air outlet
5. Water reservoir backlighting and air ionization function switch
6.Base
7.Aroma capsule
8.Water tank
9. Water reservoir cover with a valve
10. Water filter
11. Water-level transmitter
12. Ultrasonic transduser
13. Water reservoir backlighting lamp
14. Device operation lamp
15
. On- and -Off and steam escape intensity controller
5. List of parts
1. Air humidifier 1
2. User's manual - 1
. Guarantee slip - 1
4. Package - 1
5. Water filter -3
6. Filling tank with water
When moving the humidifier you should hold the humidifier by the base.
Remove the water tank from the device.
1. Grab the tank handle and pull it upwards.
2. Unscrew the tank cap counterclockwise (9).
3. Fill the tank with water.
4. Screw the tank cap clockwise (9)(pic. 1).
Make sure the tank cap is securely tightened. Be sure that the rubber
gasket is installed to the tank cap. Securely tighten the cap clockwise.
Incomplete fulfillment of the abovementioned measures causes the air
coming into the water tank and, as a result, a failure.
5. Install the tank to the device.
7
. Appliance operation
S
witching on/off, control of steam escape intensity
P
lug the appliance. Before that, fill the tank with water. Turn the on-and-off
and steam escape intensity controller to the right
( )
.
The appliance will switch on, the indication light will flash and steam will
come out from the diffuser. In the very beginning of this operation the
diffusion level may be unstable, which is caused by temperature difference
and water quality. Stabilization of this process will take a short time.
Turning the controller to the right and to the left, you may control the steam
intensity. Higher intensity of steam escape results in stronger and faster air
humidification.
Night mode
To choose the night mode set the turn on / turn off and steam outflow rate
controller to the position
« »
In night mode the device operates with less noise and intensity. Depending
on the ambient temperature, humidification capacity may vary from 80 to
100 ml/h
Relative air humidity for comfortable conditions should be between 40 and
60%. You may define a favourable humidity level on the basis of your own
feelings or use a special device - hygrometer*, measuring a relative humidity
level.
To enable or disable the ionizer press the appropriate button (13).
The ionizer generates negative ions (anions) and refreshes the air in the
room. Anions strengthen the nervous and circulatory systems, improve the
lungs and provide effective protection against respiratory illnesses (such as
asthma and pneumonia). Anions purify the air of dust and smoke.
Air flavouring
The appliance is equipped with a chamber for aromatic oil. When the
aromatic oil is added, the air will be flavoured. Aromatic oil is not included in
the delivery set.
Automatic cut-out in the absence of water
Upon fall of water level in the reservoir lower minimum allowed the
ultrasound membrane of the device cuts out automatically. The red detector
lights up on the control panel. To continue the device functioning it is
necessary to fill the reservoir with water in accordance with the paragraph 5
Filling the reservoir with water (pic. 1)
4
-
On/ Off
-
Maximum capacity
-
Night mode
-
Water reservoir backlighting and air ionization function switch
www.timberk.
com
electric humidifier
Summary of Contents for THU UL 09 (BL)
