Timberk THU UL 23 E, Instruction Manual

5

www.timberk.com • ultrasonic humidifier

5

1. Top cover

2. Aroma box

3. Water Tank 

4. Control button

5. Bottom part

6. Mist Nozzle

7. Mist generation

8. Power cord

5. SCOPE OF DELIVERY

1. Air humidifier – 1 pc.
2. Instruction manual and warranty card - 1 pc.
3. Package – 1 pc.

6. FILLING THE TANK WITH WATER

1. Remove the tank from the stand and remove the top cover 

from it.

2. Pour water in the reservoir no higher than the maximum water 

level scale «MAX».

3. Install the top tank cover and install it on the stand.

4. Check that the tank on the stand is installed securely, then 

connect the plug of the power cord to an electrical outlet.

Fig. 2 

7. OPERATION OF THE UNIT

Set the device strictly vertically on a flat, dry surface, then 

connect the device to the electrical network, previously filling the 

reservoir with water. Press the on / off button and select the 

steam output intensity (Fig. 2). The device will turn on, the light 

blue work indicator will light up on the control panel and steam 

will flow from the sprayer. At the very beginning of this operation, 

the level of spraying can be unstable, which is caused by the 

temperature difference and water quality. It will take a short time 

for this process to stabilize.

Steam output intensity adjustment

In order to change the intensity of the steam output, press the 

button on the control panel several times, the intensity of the 

steam output will change: off, high, low.

Comfortable conditions are achieved with a relative humidity 

of 40 to 60%. You can determine the favorable humidity level 

for you by your own sensations, or you can use a special 

hygrometer (not supplied) for this purpose, which measures the 

relative humidity level.

Automatic shutdown in the absence of water

If the water level in the tank drops below the minimum 

permissible level, the ultrasonic membrane of the device will 

automatically turn off, while the red indicator lights up on the 

control panel. To continue the operation of the device it is 

necessary to fill the reservoir with water according to item 6