2-03-2022
N
L
4. Connect
Ø20 cm
Ø20 cm
65cm
65cm
4. Connect
Bosco excl cable
1. Drilling
Drill or dig holes in the ground.
2. Place
Place the Bosco in the hole.
3. Digging
-Dig out to 40cm deep.
Make sure there is no voltage on the
ground cables
- Place the ground cables.
- Feed the cables through the Bosco.
5. Finishing
- Straighten the pole with the help of a spirit level.
- Close the hole in the ground.
Bosco incl cable
3. Digging
-Dig out to 40cm deep.
Make sure there is no voltage
on the ground cables
-Place the ground cables
2. Place
Place the Bosco in the hole.
1. Drilling
Drill or dig holes in the ground.
5. Finishing
-Straighten the pole with the help of a spirit level.
-Close the hole in the ground.
Connect
with an IP68
Castjoint
ground cable
Stainless steel cap
Driver
ground cable
