C190-0308 - Rev 1.0 EN
35/66
5
Maintenance Instructions
THE FOLLOWING PAGES DETAIL ONLY BASIC MAINTENANCE
GUIDELINES SPECIFIC TO YOUR CHIPPER.
THIS IS NOT A WORKSHOP MANUAL
The following guidelines are not exhaustive and do not extend to generally accepted standards of
engineering/mechanical maintenance that should be applied to any piece of mechanical equipment
and the chassis to which it is mounted.
Authorised Timberwolf service agents are fully trained in all aspects of total service and maintenance
of Timberwolf wood chippers. You are strongly advised to take your chipper to an authorised agent for
all but the most routine maintenance and checks.
Timberwolf accepts no responsibility for the failure of the owner/user of Timberwolf chippers to
recognise generally accepted standards of engineering/mechanical maintenance and apply them
throughout this machine.
The failure to apply generally accepted standards of maintenance, or the performance of
inappropriate maintenance or modifications, may invalidate warranty and/or regulatory compliance, in
whole or in part.
Please refer to your Timberwolf service agent for service and maintenance.
5.1
Safe Maintenance
WARNING
ALWAYS IMMOBILISE THE ENGINE BEFORE UNDERTAKING ANY
MAINTENANCE WORK ON THE CHIPPER, BY REMOVING THE
KEY AND DISCONNECTING THE BATTERY.
ENSURE THE CHIPPER IS STABLE BEFORE PERFORMING ANY
MAINTENANCE.
l
The cutting blades are extremely sharp and should be handled with extreme caution. Always
wear gloves when handling the blades.
l
The rotor locking tool should be fitted while changing blades, to prevent unexpected movement of
the rotor.
l
The major components of the Timberwolf are heavy. Lifting equipment must be used for dis-
assembly.
l
Clean machines are safer and easier to maintain.
l
Avoid contact with hazardous materials.
TW 280FTR (Petrol)
Summary of Contents for TW 280FTR (Petrol)
