34
TO EXTINGUISH
1. The manually shutoff pull-rod up, knob counterclockwise rotation to stop quickly
，
the wick will de
lowered to the bottom and the fire will be out in 1-5 minutes extinguish.
2. Make sure the fire has deem extinguished.
3. Never fail the extinguish the fire before you move the heater to another place, before you evacuate the
room in which the heater is used.
Automatic Safety Shut-Off
This heater is equipped with an automatic safety shut-off device. The purpose of this
device is to quickly and efficiently shut-off the heater should the heater be jarred or
tipped over while in operation. This is the main safety system that is built into the
heater
，
and it functions to prevent the flame from spreading if the heater is knocked
over.
The automatic safety shut-off device is built into the mechanism that raises and
lowers the wick. It has been designed to that if the pendulum is jarred by a shock of
some sort
，
it retracts a latch from the wick control shaft ratchet
，
and a torsion
spring reacts to drop the wick to its fully lowered position. This rapid lowering of the
wick extinguishes the flame.
IMPORTANT NOTICE: For the safety shut-off device to function property
，
the wick
must be free of carbon and tar deposits. Regularly performing the “Carbon Removal
/Dry Burning”procedure described in the “Wick Maintenance”and “Carbon Removal
/Dry Burning”sections on page 6 is very important to the proper functioning of this
important safety device.
IMPORTANT NOTICE: PLEASE CHECK THE SAFETY SHUT-OFF DEVECE
Summary of Contents for 102827423
Page 10: ...10 Kuva 1 Kuva 2...
Page 11: ...11 Kuva 3 Kuva 4...
Page 12: ...12 kuva 5 Kuva 6 Kuva 7...
