- 18 -
PRODUCTS INTRODUCTION
Congratulations for your purchase.
NL30CUT, NL40CUT, NL50CUT, NL60CUT are made by international most
advantaged invert technical .50Hz/60Hz frequency is inverted to high frequency
(frequency is over 100KHz) by V-MOSFET, then step down voltage and rectification
current, inverter power supply generates powerful DC welding current through PWM
technical. Because inverter technical of switch power is used, dimensions and weight
of main transformer has reduced substantially and efficiency has increased 30%.
Piloting arc system can strike arc easily with principle of high frequency
oscillating .It has functions that it can supply gas ahead and turn off gas delayed.
Rilon cutting machine has characteristics as following:
1.
Stabilizing.
2.
Reliability.
3.
Lightness.
4.
Save-energy and no noise.
5.
High cutting speed.
6.
Cutting smoothly and no polish demands.
Cutting machine can be used widely; it is suitable for cutting stainless
Steel, alloy steel, mild steel, copper and other color metal materials.
Welcome to use products of our Company and make suggestions, we will try our best to
perfect our products and service.
