background image

16 

1030 Technical Manual

 

P a g e

 | 

16

  

 

9. 

G uarantee & S ervicing  

Guarantee Period 

This unit is guaranteed against defects in materials and workmanship for a period of 

one year

 from its delivery to the customer. 

  
We maintain comprehensive after sales facilities and the unit can, if necessary be 
returned to us for servicing. During this period, Time Electronics Ltd will, at its 
discretion, repair or replace the defective items. For servicing under guarantee, the 
instrument type and serial number must always be quoted, together with details of any 
fault and the service required. The purchaser of the instrument must prepay all 
shipping charges. Time Electronics Ltd will pay return shipping charges. 
  
This guarantee is void if servicing has been attempted by an unauthorised person or 
agent.  If, during the guarantee period, failure is due to misuse or abuse of the unit, the 
repair will be put in hand without delay and charged unless other instructions are 
received. 
 
Please note that if you require a new UKAS Certificate during the warranty period, this 
will be charged at the current rate on our price list. 
  

Service After Guarantee Period 

Even after the guarantee period has expired, Time Electronics Ltd., can still service 
your instrument. As the manufacturer, we have the specialised knowledge needed to 
keep your instrument in peak condition and we also maintain a comprehensive spare 
parts service. 
  
Please enclose details of the service required and your full company details including a 
contact name when returning for servicing. 
  

Returning Instruments 

When returning instruments, please ensure that they have been adequately packed, 
preferably in the original packing supplied. 

Time

 

Electronics Ltd will not accept 

responsibility for units returned damaged.

 Please ensure that all units have details 

of the service required and all relevant paperwork.  
  
Send the instrument, shipping charges paid to:- 
  

Time Electronics Ltd 

Botany Industrial Estate, Tonbridge, Kent, TN9 1RH 

Tel: +44(0)1732 355993  Fax: +44(0)1732 770312 

Email: mail@TimeElectronics.co.uk 

Web Site:  www.TimeElectronics.com 

 

 

 

 

Disposal of your old equipment 

 

1.  When this crossed-out wheeled bin symbol is attached to a product it means the 

product is covered by the European Directive 2002/96/EC. 

2.  All electrical and electronic products should be disposed of separately from the 

municipal waste stream via designated collection facilities appointed by the 
government or the local authorities. 

3.  The correct disposal of your old appliance will help prevent potential negative 

consequences for the environment and human health. 

4.  For more detailed information about disposal of your old appliance, please contact 

your city office, waste disposal service or return to Time Electronics. 

 

Summary of Contents for 1030 MicroCal

















Reviews: