SET
SET
SET
Year
Month
SET
SET
SET
OFF
Mo
ON
Prog
Mo Tu We Th Fr
SET
Mo Tu We Th Fr Sa Su
SET
MODE
OFF
Mo
Sa Su
MODE
A
ON
Prog
SET
OFF
Prog
Mo Tu We Th Fr
SET
SET
Day
Time
8
9
Set ON/OFF times as before.
Once programme 6 OFF has been set, press ‘Prog’ to exit programme mode.
At any time during programming, if the ‘Prog’ button is held down for 3 seconds,
the ZV700B will return to operating mode.
The display will
now show.
Where the time is correct, the day is correct, and the ON/OFF indicator reflects
the current programme. The default mode when leaving programming is ‘Auto’,
depicted by an A on the display.
4a. Reviewing Programmes:
Press and hold ‘Prog’ until the programmed mode shows on the screen. This will
show the mode the ZV700B was programmed in. It is possible at this stage to
change this mode (say from 24 hr to 5+2) using ‘Adv’ or ‘Mode’, but this may blank
any previously entered times. Press ‘Prog’ to confirm the mode you wish to change.
Use ‘Adv’ or ‘Mode’ to scroll to the day(s) that needs reviewing. Press ‘Prog’
to access the entered times, and change as per programming instructions.
Programming Across Midnight:
To programme across midnight, enter the start time of the last period
(say 20:00), and then leave the end time blank ”––:––”.
Start the next days ON period at 00:00 and then enter the OFF time
that is required.
Note: For 24 hour setting the first ON period would be 00:00 for all 7 days.
