10
11
NOTE: Heavy cloud cover or rain may make it difficult to acquire a satellite fix.
The GPS turns off automatically if no satellite signal is detected for 15 minutes.
TAkE A RUN
Start the timer in Run mode to begin timing a workout. While the timer is
running, the watch records speed, distance, pace, and calorie data.
1. Press MODE until RUN displays.
2. Press + or – to select GPS, then press OK.
3. Press OK twice to acknowledge the battery life and memory messages.
4. Press START.
The workout begins timing.
5. During your workout press view to change display.
6. When you are finished with your workout, press STOP. The workout stops
timing.
7. Hold SAVE to save the workout and reset the timer.
2. Press + or - to select USER, then press OK.
3. Press + or – to select gender, then press OK.
4. Repeat step 3 for age, weight, and height.
5. Press MODE to exit.
TURN ON THE gPS
Before you can use the watch to collect speed, pace, and distance data, you
must turn on the GPS and acquire a satellite fix. Do not start moving before you
have a GPS signal.
1. Take the watch outside and away from buildings and tall trees.
2. Make sure the watch is facing the sky and that you are not blocking the
GPS antenna in the bottom part of the watch face.
3. Stand still.
4. Press GPS ON/OFF.
The
and
icons flash when the GPS is searching for satellites. They turn
solid when the fix is achieved, and more “bars” in the
indicate a stronger fix.
