press the reset button on the backside of the housing.
In case there is bad reception, no automatic time setting is possible, please follow the steps.
Manual time setting for TX6000 Model.
•
Press and hold down the “MODE” button for three seconds.
•
The year display “2000” starts to flash. Now use “
▲
&
▼
” to set the correct year.
•
Press, “MODE” to confirm your setting.
•
The month display starts to flash. Now use “
▲
&
▼
” to set the correct month.
•
Press, “MODE” to confirm your setting.
•
The date display starts to flash. Now use “
▲
&
▼
” to set the correct date.
•
Press, “MODE” to confirm your setting.
•
The 12Hr display starts to flash. Now use “
▲
&
▼
” to set the 12Hr or 24Hr for the
time format.
•
Press, “MODE” to confirm your setting.
•
The hour display starts to flash. Now use“
▲
&
▼
” to set the correct hour.
•
Press, “MODE” to confirm your setting.
•
The minute display starts to flash. Now use the “
▲
&
▼
” to set the correct minute.
•
Press, “MODE” to confirm your setting.
•
The daylight saving time S and on display starts to flash. Now use the “
▲
&
▼
” to
set the on or off.
•
Press, “MODE” to confirm your setting and to end the setting procedure.
Information
Normal clock mode press “+” key to set the correct time zone (E-Eastern,
C-Central, M-Mountain and P
-
Pacific).
•
The clock changes after 8 seconds without touching the buttons automatically from setting
mode to normal time mode.
Setting for daily alarms.
•
Press and hold the “alarm” button for 3 seconds until alarm hour flashes.
•
Now use the “
▲
&
▼
” buttons to select the alarm hour you require and
Then briefly press the “ALARM” button to set this minute.
Press, “ALARM” to confirm your setting.
To activate or deactivate the daily alarm.
•
To activate or deactivate the daily alarm, push the alarm button quickly.
+ Alarm activated Bell symbol will be in the display
+ Alarm deactivated Bell symbol disappears
Information
The clock changes after 8 seconds without touching the button automatically from setting mode to
normal time mode.
The alarm sounds for 2 minutes, if not stopped by the activation of the beloved push button. In
this case the alarm will automatically restart after 24 hours.
