7
If you encounter poor reception on the radio control clock, which results in the
inability to have the time set automatically, please use this manual setting
proceed listed below:
MANUAL TIME SETTING
•
Press and hold down the “SET” button for three seconds.
•
The year display “2000” starts to flash. Now use “+ & -“ to set the correct
year.
•
Press, “Set” to confirm your setting.
•
The month display starts to flash. Now use “+ & -“ to set the correct month.
•
Press, “Set” to confirm your setting.
•
The date display starts to flash. Now use “+ & -“ to set the correct date.
•
Press, “Set” to confirm your setting.
•
The 12Hr display starts to flash. Now use “+ & -“ to set the 12Hr or 24Hr
for the time format.
•
Press, “Set” to confirm your setting.
•
The hour display starts to flash. Now use “+ & -“ to set the correct hour.
•
Press, “Set” to confirm your setting.
•
The minute display starts to flash. Now use the “+ & -“ to set the correct
minute.
•
Press, “Set” to confirm your setting.
•
The daylight saving time S and on display starts to flash. Now use the “+ &
-“ to set the on or off.
•
Press, “Set” to confirm your setting and to end the setting procedure.
INFORMATION:
•
Normal clock mode press “+” key to set the correct time zone (E-Eastern,
C-Central, M-Mountain and P
-
Pacific).
•
To set up the connection to the outdoor transmitter sensor manually, press
and hold down” Channel” for the three seconds.
•
After eight seconds without a button being pressed, the clock switches
atomically from Setting mode to Normal clock mode.
•
There are seven languages available for the day display: German,
English, French, Danish, Dutch, Italian and Spanish.
SETTING THE DAILY ALARMS
The weather station possesses two daily alarms. To view the set alarm
time press the “ALARM” button briefly. The display switches from the
clock to Alarm 1 and, if you press the button again, to Alarm 2 – after five
seconds, the weather stations switches back to the normal time display.
Proceed as follows to set the daily alarms:
