8
•
Press and hold down the “ALARM” button for three seconds until alarm
time 1 and the flashing icon are displayed.
•
Now use the “+ & -“ buttons to select the alarm time you require and
Then briefly press the “ALARM” button to set this time.
•
The hour display of the alarm time starts to flash. Use the arrow keys
“+ & -” to set the required hour.
•
Press, “ALARM” to confirm your setting.
•
The minute display of the alarm time starts to flash. Use the arrow key “+
& -” to set the required minute.
•
Press, “ALARM” to confirm your setting and to end the setting procedure.
ACTIVATING AND DEACTIVATING THE DAILY ALARMS
To activate or deactivate the daily alarms, briefly press the “- “ button.
Press 1 x: Alarm 1 activated
Press 2 x: Alarm 2 activated
Press 3x: Both alarms activated
Press 4x: Both alarms deactivated
INFORMATION:
•
After eight seconds without a button being pressed, the clock switches
automatically from Setting mode to Normal clock mode.
•
The alarm will sound for two minutes if you do not deactivate it by pressing
any button. In this case, the alarm will be repeated automatically after 24
hours.
•
Crescendo alarm - length: 2 minutes - increases in sound four times while
the alarm signal is heard.
•
When the alarm goes off, there will be an automatic display of the LED
back light lasting as long as the alarm sounds.
AUTOMATIC SNOOZE FUNCTION
•
To activate the automatic snooze function: While the alarm is sounding,
press the “SNOOZE/LIGHT” button to activate the snooze function. When
the snooze function is activated, the “Zz” symbol appears in the display.
•
This operation moves the alarm back by five minutes and the alarm will
restart at this time.
•
The snooze function can be interrupted by pressing any button and can be
repeated up to seven times.
SETTING THE TEMPERATURE ALARM
•
Press and hold down the “TEMP” button for three seconds until the
symbol for the temperature alarm starts to flash.
•
Press the “CHANNEL” button to switch between the different radio
frequency channels (CH1, CH
2
, CH3) (for multiple sensors within range).
