9
Note, this model TX6180 comes with just one sensor. More sensors for
the other two channels are available
for purchase from Timex Weather
Products – Maverick Industries, 94 Mayfield Avenue, Edison, NJ 08837.
•
Press, “TEMP” to confirm the selected channel.
•
The symbol for the upper limit of the temperature alarm starts to flash. Use
the arrow keys “
▲
&
▼
” to set the required maximum temperature.
•
Press, “TEMP” to confirm your setting.
•
The symbol for the lower limit of the temperature alarm starts to flash. Use
the arrow keys “
▲
&
▼
” to set the required minimum temperature.
•
Press, “TEMP” to confirm your setting and to end the setting procedure.
Activating and deactivating the temperature alarm
•
Briefly press the “TEMP” button to activate or deactivate the temperature
alarm for all the channels of the outdoor sensors.
•
Alarm activated: Temperature alarm symbol appears in display.
•
Alarm deactivated: Temperature alarm symbol disappears
INFORMATION:
•
You can set up a temperature alarm for every channel
.
•
If you set the maximum to a temperature, which is lower than he minimum,
then you will not be able to complete the setting process.
•
The minimum must always be at least 1° C below the maximum.
•
When the temperature alarm sounds, the appropriate channel and the
upper or lower limit symbol is shown.
12/24 HOUR MODE – The time is displayed either in 12 or 24 hour format.
Briefly pressing the “_” button allows you to switch between the individual
modes. The symbol AM (before midday) or PM (after midday) appears after
the time.
°C/°F TEMPERATURE DISPLAY
The temperature is displayed either in
°
C or °F. Briefly pressing the “
▼
” button
allows you to switch between the individual temperature scale modes.
TEMPERATURE TREND DISPLAY
After you insert the batteries, the weather station measures the current
temperature. The trend display shows a neutral temperature course (horizontal
arrow).
The further course of the trend display is determined as follows:
•
If, after an hour, the temperature is more than 1
°
C higher than the value
measured first, then a positive course is displayed (arrow pointing
upwards).
•
If, after an hour, the temperature is more than 1
°
C lower than the value
measured first, then a negative course is displayed (arrow pointing
downwards).
•
If the temperature does not change within an hour, then the upward or
downward pointing arrow becomes a horizontal arrow. The measured
