THANK YOU FOR PURCHASING YOUR TIMEX WATCH.
EXTENDED WARRANTY
Available in U.S. only.
Extend your warranty for an additional 4 years
from date of purchase for $5. You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours.
Payment must be made within 30 days of purchase. Name, address, tele-
phone number, purchase date, and 5-digit model number required. You
can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676,
Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate
your Timex watch.
www.timex.com
BASIC OPERATIONS
FUNCTIONS
Time, date, hourly chime, Chronograph with split/lap storage, Countdown
Timer, Interval Timer, Synchronized Timer, Training log, Counter, Ten
Alarms with daily, weekday, weekend, or weekly alarm choices,
Appointments, Notes, INDIGLO® night-light with Night-Mode® Feature.
DEMO
Setting DATE will erase this feature. It will reappear when you change the
battery.
CROWN 1
MODE
STOP/RESET
START/SPLIT
SET TIME & 12-/24- HOUR TIME DISPLAY
1. Press MODE until TIME appears.
2. Pull CROWN one stop. Turn to set correct time.
3. Press STOP/RESET or START/SPLIT to select 12- or 24-hour time.
4. Push CROWN in to complete setting.
5. Press STOP/RESET to select next Time Zone. Press and hold to switch.
HOLD TO SWITCH will appear. Continue holding until beep sounds.
6. Set Time as above. Repeat for next Time Zone.
7. To name Time Zone, pull CROWN two stops. Turn to select first letter.
Press START/SPLIT to select next letter. Push CROWN in to complete
setting.
8. To peek at different Time Zone, press STOP/RESET once for TZ2, twice
for TZ3.
9. To view next appointment, press START/SPLIT. If none is scheduled, NO
APPOINTMENTS UPCOMING will appear.
SET DATE
1. Press MODE until DATE appears.
2. Pull CROWN out one stop. Turn CROWN to set date.
3. Press STOP/RESET or START/SPLIT to choose between year-month-
date, month-date-year or date-month-year display.
4. Pull CROWN out to second stop. Turn CROWN to select year. Push
CROWN in to complete setting.
Note:
• Day will automatically set itself. Press STOP/RESET or START/SPLIT to
view week number instead of day of the week.
W-39
847-095003
INTERVAL TIMER
You can set multiple timers that coundown in sequence.
1. Press MODE until INTERVAL TIMER appears. Turn CROWN to select
timer 1-10.
2. Set using procedure for Countdown Timer.
3. Press START/SPLIT to start a countdown. When that countdown is
complete, the timer proceeds to the next non-zero interval that is set
then repeats entire sequence.
SYNCHRONIZED TIMER
Automatically displays total elapsed time and accumulated stop time for
either Countdown Timer or Chrono.
1. Press MODE until SYNCHRO TIMER Appears. Pull CROWN out one stop
and turn to change format of display (TOTAL/STOP, STOP/TOTAL, or
TOTAL).
2. Start Countdown Timer or Chrono. Timer symbol
or Chrono symbol
will appear in Synchro Timer display. Display
will show total elapsed time since Countdown Timer or Chrono was
started and accumulated stop/pause times (unless TOTAL display
option was selected).
3. When Countdown Timer reaches 0 or when Chrono is reset, Synchro
Timer will display final stop and elapsed times.
4. Syncho Timer will automatically reset when either Countdown Timer
or Chrono is reset and restarted. To reset in Syncho Timer mode, press
STOP/RESET.
COUNTDOWN TIMER
1. Press MODE until COUNTDN TIMER appears. Turn CROWN to select
timer 1-10.
2. Pull CROWN one stop and turn to set hours and minutes (up to 24
hours).
3. Pull CROWN two stops and turn to set seconds.
4. Press STOP/RESET or START/SPLIT to select Countdown and Stop ,
Countdown and Repeat
or Countdown and Start Chrono
.
5. Push CROWN in to complete setting.
6. To select a tone to sound halfway through the count, with the CROWN
in, press STOP/RESET. 1 / 2 will appear in upper left corner of screen.
7. Turn CROWN to select other timers. Set as above.
8. Press START/SPLIT to start countdown . (
will flash). The set time will
appear at top right of the screen. Press STOP/RESET to pause and
START/SPLIT to resume. To clear the timer and start over, press and
hold STOP/RESET.
A beep will sound and INDIGLO® will flash when time reaches zero.
Press any button or turn CROWN to silence beep.
Notes:
• During Countdown and Repeat, the repetition number will appear at
the top left of the screen in both the countdown and interval timer.
• Countdown and Start Chrono will not work unless Chrono is reset
(00:00).
CHRONOGRAPH
Watch will count at 1/100 second intervals to 1 hour and 1-second inter-
vals to 100 hours. It will count up to 199 laps and store 200 laps.
Run Chrono
1. Press MODE until CHRONO appears.
2. Press START/SPLIT to start Chrono. (
will flash).
3. Press START/SPLIT again to take a split. Chrono will continue to run in
background. (
will continue to flash). Press MODE or leave idle for
10 seconds to return to running Chrono. Lap number will appear in top
left of display.
4. Press STOP/RESET to stop or pause Chrono. Press START/SPLIT to
resume. (Total stopped time will appear in Synchronized Timer).
5. To reset Chrono, press and hold STOP/RESET (HOLD TO RESET will
appear).
6. To store workout turn CROWN (with Chrono stopped and CROWN
pushed in). Display will show available memory.
7. To recall workout (with Chrono stopped), turn CROWN to select work-
out by date. Pull CROWN out one stop. Turn CROWN to recall
laps/splits taken and to view your best and average laps. Push CROWN
in when finished.
8. To clear workout, select workout by turning CROWN. Press and hold
STOP/RESET until clear.
9. To clear all workouts, with Chrono reset, press and hold STOP/RESET
until clear.
Notes:
• To view Lap/Split times during a workout, pull CROWN out one stop
(while Chrono is running) and turn to scroll through details. Current lap
will not be shown.
• To change display format (with Chrono reset) pull CROWN out two
stops and turn to select Lap/Split (Split large) or Split/Lap (Lap large).
Push CROWN in to complete setting.
