25
12. QUICK REFERENCE TIMKEN C-POWER MULTI-POINT LUBRICATOR GUIDE
Protection cover
With bayonet catch for quick
opening and closing.
Timken C-Power LV-Unit
(Lubrication Canister)
Cartridge, piston, spindle
filled with lubricant.
Red LED
Additional malfunction
indication.
Push Button: MODE/SAVE
Accesses the Configuration
Menu and saves the selected settings.
Drive Unit
Contains electronics, motor
and pump system.
Content
Description of the enclosed lubricant
and the filling date.
Type
Product type and size of C-Power LV-unit.
Display
Provides information about operating
conditions, malfunctions, settings and
the lubricant volume left in the C-Power
LV-unit.
Push Button: ON/OFF/SELECT
Used to turn the unit on and off. Also to
gradually increase the discharge period.
Green LED
Provides additional indication of the
current operating condition.
Connector for distribution block.
Connection thread
G 3/8 outside and G 1/8 inside for
application into a lubrication point or for
connecting a grease tube.
DISPLAY
Configuration menu
For entering the settings.
Ice crystal
Activates when the
temperature drops below
32° F/0° C (blinking signal) or
if the low-temperature cut-off
has shut off the lubrication
system (constant signal).
Plug-In
Where the
contact pin (jumper) is
plugged in.
Contact Pin
(Jumper) Sets
the size of the C-Power
LV-unit (250 cc or 500 cc).
Battery Set
Powers the
system.
DRIVE UNIT
Battery Compartment
Where battery set
is inserted.
Catch
For driving the spindle.
Interlocking teeth
Used to securely position
the C-Power LV-unit.
Setting Mode
Displays the current setting in days,
weeks or months.
Remaining volume of the C-Power LV-unit
Shows the amount of lubricant that
remains in the C-Power LV-unit, in
percentage of volume (% Vol.).
Number Display
Shows the value of the remaining volume, the value of the
discharge period or the malfunction.
