UM-34
Manual positioning of the axis
From the “Program” tab, you can
move the axis carriage in easy way
and whenever you want using the
“Jog” section, which is always visible
under the 4 program instructions.
Press “Reset and Enable” if you see
the red led “Safety On” to enable the
manual movement.
Now you can enable and disable the
drive pressing plus and minus button.
The axis will move in accordance with
velocity and acceleration set. The “-”
direction will move the carriage to-
wards the motor. On the contrary, the
“+” direction will move the carriage
away from the motor.
When programming, you can use the
“Set Position” button of the “Move to
target position” to store the position
reference reached manually. See pg.
37 fig. 77.
6 Rollon URCap manual
Fig. 68
Fig. 69
Fig. 70
Summary of Contents for ROLLON CTU 220-1I
