Tinytag TGRF-4600 Instruction Manual Download

Page: 5 / 5

Tinytag Plus Radio Data Logger with Temperature & Relative Humidity Probe

Tinytag Plus Radio Data Logger with Temperature & Relative Humidity Probe
((((----25 to +85°C/0 to 100% RH)

25 to +85°C/0 to 100% RH)

TGRF-4600

Issue 1

Issue 1 (19th April 2019) E&OE

www.tinytag.info

sales@tinytag.info

Required and Related Products

Approvals

Warranty

This logger is configured to meet Gemini’s quoted accuracy specification
during its manufacture.

We recommend that the calibration of this unit should be checked annually
against a calibrated reference meter.

A traceable certificate of calibration can be supplied for an additional charge
either at the point of purchase, or if the unit is returned for a Service
Calibration.

Calibration

This product carries a manufacturing defects warranty of 12 months from the
date of purchase. Units returned under warranty will be repaired or replaced at
the manufacturer’s discretion. This warranty does not cover mishandling,
modification or battery replacement and is subject to our standard Terms and
Conditions of Sale, a copy of which can be found at

www.tinytag.info

Required Parts

This data logger forms part of a Tinytag Connect system and cannot be used
as a standalone device.

To use this data logger you will require a radio receiver and a Connect version
of the Tinytag Explorer software. These are supplied together in a pack, as
follows:

ACSRF-4040-PK

Plus Radio Ethernet receiver & software pack

for connecting to the computer running the radio system directly across a LAN.

Or

ACSRF-4030-PK

Plus Radio USB receiver & software pack

for connecting directly to the computer running the radio system using a USB
port.

Probes

This logger uses a

PBRF-8002

probe, which is fitted to the logger using a

CAB-0034

extension cable for Plus & Ultra radio temp/RH probes, 1.5m (both

of these are supplied with the logger).

An

ACS-0045

Radio RH Probe Clip is also supplied with the logger.

Further Related Products

ACS-0044

Tinytag Plus Radio power supply

Gemini Data Loggers (UK) Limited hereby declares that this radio data logger
is in compliance with the essential requirements and other relevant provisions
of RED 2014/53/EU and RoHS directive 2011/65/EU. A copy of the
declaration of conformity is available upon request.

The radio system also complies with EN 300 220:V2.4.1 and
EN 301 489-3: V1.6.1 (-A EU version) and AS/NZS 4268:2012 (-B AUS
version).

This logger also conforms to the following EMC standards:

EN 55032:2012; EN 61326

-1:2013 & EN 301 489-1:V1.9.2.

Gemini Data Loggers (UK) Ltd. operates a Business Management System
which conforms to ISO 9001 and ISO 14001.